Kicker 45KM654L 6.5″ LED Marine Coaxial Speakers

Choices, Choices
In addition to a trio of sizes and available LED lighting, every KM coax comes with both charcoal and white grilles, so you can match the theme of your audio to the theme of your boat with ease.

Kicker Quality
The KICKER logo means it sounds great and will last for years. Whether your boat is in salt or fresh water, we know you need spectacular highs and lows to get that quality, full-range audio designed specifically for a marine environment.

Marine Made
KICKER went the extra mile to make these coaxials 100% marine-grade. Built from the ground up to be the best possible speaker for your boat, we added UV treatments to injection-molded cones and Santoprene® surrounds. We made splash-and-spray-resistant sealed motors, cones and locking/sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come.

The Standard
All KICKER Marine Coaxials meet or exceed ASTM standards for humidity and corrosion as well as for material degradation due to UV exposure. They also come with rustproof, 316L stainless-steel speaker hardware.

* ASTM B117 200 hr. Salt Fog Test
** ASTM G154 400 hr. Accelerated UV Test

Light it Up
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Features Four-Ohm Voice Coil
3/4-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***

*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test

This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power.

Specifications
Woofer(in,mm): 6-1/2, 165
Tweeter(in,mm): 3/4, 20
Tweeter Dome Material: PEI
Rated Impedance(Ohms): 4
Peak Power (watts, per ANSI/CTA-2031-A): 195
Recommended Amplifier Power (watts RMS): 65
Sensitivity(1W,1m): 90
Frequency Response(Hz): 35-21k
Mounting Hole Diameter(in,mm): 5-1/16, 128
Mounting Template (*For template to be accurate, ensure the print properties are set at 100% not scale to page.)
Mounting Depth(in,mm): 2-3/8, 59.9
LED Lighting: Yes
Grilles: Charcoal and White

What’s in the Box
2 – 6.5″ 4Ω Coaxials
8 – Mounting Screws
8 – Mounting Screw Clips
2 – Wire Connection Cover
2 – Zip Ties